{"product_id":"hana-ml-moving-coil-phono-cartridge","title":"HANA ML Moving Coil Phono Cartridge","description":"\u003cp\u003eThe HANA ML is the low-output (0.4mV) M Series cartridge. It pairs a nude Microline stylus and aluminum cantilever with a Delrin (POM) chassis and the 8-ohm Alnico generator Hana later scaled up for the \u003ca href=\"\/products\/hana-umami-blue-moving-coil-cartridge\"\u003eUmami Blue\u003c\/a\u003e. The Microline tip mimics a mastering lathe cutting head, with a longer narrower contact patch than Shibata for finer detail and longer stylus life. The ML is Hana's cleanest low-output engineering before the Umami line.\u003c\/p\u003e\n\n\u003ch5\u003eKey Features of HANA ML Phono Cartridge\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNude Microline stylus:\u003c\/strong\u003e a profile shaped like a vinyl mastering lathe's cutting head, with a longer and narrower vertical contact patch than Shibata for finer high-frequency detail and longer stylus life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum cantilever:\u003c\/strong\u003e rigid and light, paired with the nude diamond for low effective tip mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlnico magnet, pure-iron magnetic circuitry:\u003c\/strong\u003e the same low-impedance generator architecture used in the Umami Blue. Front yoke and pole pieces are pure iron and cryogenically treated; the magnet is Alnico for stable long-term field strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-output generator wound for MC stages:\u003c\/strong\u003e 0.4mV at 1kHz with an 8-ohm coil impedance, recommended into a load greater than 100 ohms. The lower coil impedance is associated with cleaner generator behavior and broader phono-stage compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelrin (POM) body with brass cap and threaded mounting:\u003c\/strong\u003e denser than the elastomer-coated body on the S MK II, with measurably better resonance damping. Headshell screws thread into metal, not plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5g cartridge mass:\u003c\/strong\u003e heavier than the S MK II, mass-matches mid-mass tonearms cleanly and improves bass authority and dynamic snap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30dB channel separation, 12-45,000Hz frequency response:\u003c\/strong\u003e tighter separation specs than the S MK II Shibata models, wider frequency response at the top end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eMicroline Stylus and Aluminum Cantilever\u003c\/h5\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/2_b1f2053b-d42b-4336-ba29-0ecb9c238bd6.jpg?v=1778331805\" alt=\"HANA ML cartridge body white background showing aluminum cantilever and Microline stylus\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eThe Microline tip is the most distinguishing change between the M Series and the S Series. Where a Shibata stylus has a hyperelliptical line-contact profile that sits relatively deep in the groove, a Microline has a longer and narrower contact patch shaped much closer to the cutting stylus that originally cut the vinyl master. That closer geometric match means the stylus reads finer high-frequency detail per pass, particularly cymbal decay, sibilance overtones, and inner-groove violin information that a Shibata starts to lose. The longer contact patch also spreads stylus wear over more surface area, which translates to longer stylus life under the same tracking force and record-cleanliness conditions. The cantilever is aluminum, rigid, light, and well-matched to the Microline tip's mass. Hana steps up to a boron cantilever on the Umami Blue, which is the next refinement above the aluminum used here.\u003c\/p\u003e\n\n\u003ch5\u003eThe 8-Ohm Alnico Generator (Same as Umami Blue)\u003c\/h5\u003e\n\u003cp\u003eThe ML's generator is the lower-impedance Alnico cross-coil that Hana later scaled up for the Umami Blue. Coil impedance is 8 ohms, output is 0.4mV at 1kHz, and recommended load is greater than 100 ohms. The lower coil impedance is associated with reduced internal damping in the generator (less self-induced loss as the coil moves through the magnetic field) and broader phono-stage compatibility (the cartridge is less sensitive to the exact load resistance set on the phono stage). Channel separation measures 30dB at 1kHz, slightly tighter than the S MK II's 28dB. Frequency response extends from 12Hz to 45kHz, wider at the top than the S MK II's 32kHz ceiling, which the Microline geometry contributes to.\u003c\/p\u003e\n\n\u003ch5\u003ePure-Iron Yoke, Cryogenic Treatment, and the Alnico Magnet\u003c\/h5\u003e\n\u003cp\u003eThe ML magnetic circuitry uses pure iron yoke and pole pieces (rather than steel alloys), cryogenically treated. Cryogenic treatment is a slow controlled cool-down to roughly minus 300F followed by a slow return to room temperature, which refines grain boundaries in the metal, reduces internal stresses left over from machining, and (in audio applications) is associated with lower noise floor and better signal coherence. Hana applies the treatment to the front yoke and the center and rear magnetic-circuit components. The magnet is Alnico, the same magnet material used in the higher-tier Umami line.\u003c\/p\u003e\n\n\u003ch5\u003eDelrin Body and Brass Mounting Cap\u003c\/h5\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0555\/5073\/8528\/files\/4_c8b56af1-1482-4811-80c9-f1a63de9751c.jpg?v=1778331807\" alt=\"HANA ML cartridge mounted in headshell with brass mounting cap visible\" style=\"width:100%;max-width:1000px;height:auto;border-radius:12px;margin:16px 0;\"\u003e\n\u003cp\u003eThe ML body is injection-molded Delrin (DuPont's brand name for POM, a high-density acetal polymer). Delrin is denser than the elastomer-coated ABS used on the S MK II and damps body-borne resonance more effectively. The body weighs in heavier at 9.5 grams, which couples more positively to mid-mass tonearms and contributes to bass authority and dynamic snap. The top plate is a brass cap with built-in threaded mounting holes, so the headshell bolts thread into metal rather than into plastic body inserts. Installation is faster and the mechanical coupling between cartridge and headshell is more consistent over time.\u003c\/p\u003e\n\n\u003ch5\u003eTonearm and Phono Stage Matching\u003c\/h5\u003e\n\u003cp\u003eEffective compliance is 10 x 10-6 cm\/dyne at 100Hz, recommended tracking force is 2.0 grams, and cartridge weight is 9.5 grams. That puts the ML in mid-mass tonearm territory. We pair it most often with the \u003ca href=\"\/products\/rega-rb880-tonearm\"\u003eRega RB880\u003c\/a\u003e, the \u003ca href=\"\/products\/michell-t8-tonearm\"\u003eMichell T8\u003c\/a\u003e, the \u003ca href=\"\/products\/oracle-audio-paris-tonearm\"\u003eOracle Paris\u003c\/a\u003e, and the \u003ca href=\"\/products\/oracle-audio-origine-tonearm\"\u003eOracle Origine\u003c\/a\u003e. Buyers building a longer-term reference setup move up to the \u003ca href=\"\/products\/rega-rb3000-tonearm\"\u003eRega RB3000\u003c\/a\u003e ($2,445) or the \u003ca href=\"\/products\/michell-tecnoarm-2-tonearm\"\u003eMichell TecnoArm 2\u003c\/a\u003e ($1,999). On the phono-stage side, the 0.4mV output and 8-ohm coil impedance want a moving-coil input with at least 60dB of gain or an MM stage paired with a step-up transformer (1:10 to 1:20 turns ratio). Recommended load is greater than 100 ohms, with 100, 470, and 1k ohms all common starting points.\u003c\/p\u003e\n\n\u003ch5\u003eML versus MH and the Step Up to Umami Blue\u003c\/h5\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/hana-mh-moving-coil-phono-cartridge\"\u003eMH\u003c\/a\u003e is the high-output sibling to the ML. Same Microline stylus, same aluminum cantilever, same Delrin body, same brass cap, same 9.5-gram weight. Only the coil winding differs: MH is 2.0mV at 130-ohm coil impedance for MM phono inputs; ML is 0.4mV at 8-ohm coil impedance for MC stages. If you have an MC phono stage, the ML's lower coil impedance generally tracks with cleaner generator behavior and is the technically purer choice. The Umami Blue is the step up at $2,500. It uses the same lower-impedance Alnico generator family (the ML was the prototype) and the same Microline tip family, but adds a boron cantilever instead of aluminum and a refined body. Boron is stiffer and lighter than aluminum, which translates to faster transient response and finer high-frequency detail at the top end. Buyers who already run a high-resolution front end (a $4,000-plus turntable, a reference-tier MC phono stage) hear the Umami Blue's added clarity clearly.\u003c\/p\u003e\n\n\u003ch5\u003eExplore the HANA Cartridge Lineup\u003c\/h5\u003e\n\u003cp\u003eThe M Series stablemate plus the next step up:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/hana-mh-moving-coil-phono-cartridge\"\u003eHANA MH\u003c\/a\u003e\u003c\/strong\u003e: high-output (2.0mV) version of the M Series, runs straight into MM phono inputs. Same Microline stylus, same Delrin body, same $1,200 price point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/hana-umami-blue-moving-coil-cartridge\"\u003eHANA Umami Blue\u003c\/a\u003e\u003c\/strong\u003e: the upgrade to the Umami line at $2,500. Boron cantilever instead of aluminum, refined body, and the same low-impedance Alnico generator architecture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eThe Listening Room Difference\u003c\/h5\u003e\n\u003cp\u003eWe're a third-generation family business with a brick-and-mortar showroom in Chestertown, Maryland, and a reputation built on exceptional service and relentless passion for hifi. Whether you're visiting in person or ordering online, we bring decades of experience, personalized service, and honest guidance to every interaction. We don't just ship boxes. We help build systems, answer your questions like real humans, and make sure every detail of your setup is right, from the cables to the final connection. Our passion is helping you get the most out of your gear, with support that lasts well beyond the sale.\u003c\/p\u003e\n\n\u003ch5\u003eHANA ML Phono Cartridge Specifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;width:34%;\"\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;width:66%;\"\u003eMoving Coil (Low Output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eStylus\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eNude Microline Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCantilever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eMagnet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eAlnico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eMagnetic Circuitry\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003ePure Iron, Cryogenically Treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCoil Wire\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003eHigh Purity Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCartridge Housing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003ePOM (Delrin) \/ Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eOutput Level\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e0.4mV \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eVertical Tracking Force\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eTrackability\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e70 µm \/ 2g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eChannel Separation\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e30dB \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e12 - 45,000Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eImpedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e8Ω \/ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eSuggested Load Impedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e\u0026gt; 100Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eCartridge Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e9.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eHeight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e16.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"background-color:#f3f3f3;padding:12px;\"\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;\"\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"HANA","offers":[{"title":"Default Title","offer_id":67848676049265,"sku":"HANAML","price":732.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0923\/5215\/1921\/files\/hana-ml-white-bg-1000x800px.jpg?v=1792518944","url":"https:\/\/sliyden.store\/products\/hana-ml-moving-coil-phono-cartridge","provider":"sliyden.store","version":"1.0","type":"link"}